Casino Plus

List of contents of this article:

• 1, The cardboard car making process is simple
• 2 , Handmade car simple recipe picture
• 3, Ask for a carton to make a simple way to make a car
• 4、Handmade paper car method
• 5,Casino Plus How to make a car with a carton
• 6, A simple way to make a car by hand

The process of making cardboard cars is simple

First of all, choose a relatively thick cardboard, preferably a packaging box for air conditioners, TVs and other household appliances, and then draw the outline of the car on the cardboard with chalk, with a height and width of about 80 cm. After drawing, use a paper cutter Cut down the car. There are many styles of cars. You can find your favorite type on the Internet.

Use cardboard boxes to make a small car. First, prepare cardboard boxes, scissors, colored pencils, glue sticks and white paper. 02 First, use scissors to cut out the piece of the cardboard box that needs to be made into a car. 03 Use scissors to cut off a small triangle on each side of the opening of the carton.

Handmade method of paper-shell car: cut the carton into various parts of the car body and combine the parts with transparent glue. Cut some long strips with red paper and decorate the seams with these strips.

Leave one side of the narrow edge of the carton, and then seal it with wide tape. Cut open about two-thirds of the sealing surface and turn out a piece of cardboard. Then fold the two pieces of cardboard in bal. Make the wheels and steering wheels of the car with disposable lunch boxes. Remember to color them first.

handmade car simple recipe picture

Prepare a piece of colored paper, cross-fold, as shown in the figure.Turn it inward along the trace and fold it into a square, as shown in the figure. Fold the bottom up, as shown in the picture. Fold the upper corner to the middle twice in a row, as shown in the figure. Unfold the paper and squeeze out the square in the middle, as shown in the figure. Squeeze the four corners, as shown in the figure.

To make a car with a box, you need to prepare: bottle cap, toothpaste box, straw, scissors, double-sided adhesive. First of all, take out the required materials shown in the figure below for use. Next, cut the prepared toothpaste box with scissors into the shape shown in the figure below.

The first step is to prepare the necessary equipment. Step two, cut the toothpaste box into the picture. Step three. Use double-sided adhesive to fix it. The fixed appearance is as shown in the figure. Step 4. Use excess pieces of paper to make the head and tail of the car.

Step 1: Leave a narrow edge on the cartonOn one side, then seal it with wide tape, cut it about two-thirds of the sealing surface, and turn out a piece of cardboard. Then fold the two pieces of cardboard and fix it at 45 degrees, make the windshield of the car, color the car body first, and paint it with your favorite color.

Watching TV at home, it's better to make a beautiful and fun handmade car. Let me teach you how to turn waste into treasure and use waste toothpaste boxes to make a car by hand. In fact, the method is very simple. The following are the steps to make a car by hand: prepare materials: toothpaste box, 4 bottle caps, rubber clay, double-sided adhesive, straw.

A simple way to make a car

1. Open the carton, flatten it, and draw a rectangular shape on the carton with a ruler and pencil, which is equivalent to the shape of the car body.Cut it off with scissors, then fold it into the shape of the car body, and glue it with glue.

2. First of all, choose a relatively thick cardboard, preferably a packaging box for air conditioners, TVs and other household appliances, and then draw the outline of the car with chalk on the cardboard. The height and width are about 80 cm. After drawing, cut the car with a paper cutter. There are many styles of cars. You can find your favorite type on the Internet.

3. Prepare all the materials, as shown in the figure below: cut the cardboard into a rectangular shape to make the chassis of the car. Draw the chassis of the car with a pen, and the front end is used to hang a rubber band. After sketching, use scissors to reduce the excess part, and the disc of the car is done in this way.

4. Use cardboard boxes to make cars. First, prepare cardboard boxes, scissors, colored pencils, glue sticks and white paper.02 First, use scissors to cut out the piece of the cardboard box that needs to be made into a car. 03 Use scissors to cut off a small triangle on each side of the opening of the carton.

5. Handmade method of paper-shell car: cut the carton into various parts of the car body, combine the parts with transparent glue, cut some long strips with red paper, and decorate the seams with these notes.

6. Prepare materials: cartons, wide tape, scissors, card paper, coloring pen. First, seal the carton with wide tape, and then cut it at two-thirds of the seal. Find a piece of cardboard as the windshield of the car. Make 4 wheels out of cardboard and fix them on both sides of the carton.

Handmade paper car method

The car folding method is as follows: Tools: colored paper.Take out the square colored paper, fold out the rice folds and fold them into a small square, and fold the creases up on the top layer. Then the corners of the top are folded down, and the left and right sides are folded at the middle line and opened. Hold down the bottom, and put your fingers into the left and right two empty bags to unfold and press them.

First, cut the cardboard box into the body of the car, as shown in the figure. Then stick the colored paper on the carton and wrap the car, as shown in the figure. Take out another piece of colored paper and roll it into a cylindrical shape, as shown in the figure. Cut the cylindrical colored paper into wheels, and then put it on with a toothpick, as shown in the figure.

Prepare a piece of colored paper, folded in cross, as shown in the figure. Turn it inward along the trace and fold it into a square, as shown in the figure. Fold the bottom up, as shown in the picture. Fold the upper corner to the middle twice in a row, as shown in the figure. Unfold the paper and squeeze out the square in the middle, as shown in the figure.Squeeze the four corners, as shown in the figure.

Paper box, two wooden sticks; strong glue, appropriate amount of tape; scissors, red.

The process of making cardboard cars is as simple as follows: cardboard waste utilization, illustration of the method of handmade toy cars. The idea is very simple. Cut out the car body and wheels from the cardboard, and then assemble them together with straws and bamboo sticks. Need to prepare: cardboard, straw, bamboo stick, thread cutter, pencil sharpener, hot melt glue gun.

The simple way to make a handmade origami car is as follows: First, prepare a square piece of colored paper, fold the two corners of the square in half with a colored pen, and then fold the upper half down. Fold the two corners down. Cut the right side along the cutting line in the figure, and then fold it back. Fold the bottom two corners upwards.

How to make a car with a carton

1. Open the carton, flatten it, and draw a rectangular shape on the carton with a ruler and pencil, which is equivalent to the shape of the car body. Cut it off with scissors, then fold it into the shape of the car body, and glue it with glue.

2. First of all, choose a relatively thick cardboard, preferably a packaging box for air conditioners, TVs and other household appliances, and then draw the outline of the car with chalk on the cardboard. The height and width are about 80 cm. After drawing, cut the car with a paper cutter. There are many styles of cars. You can find your favorite type on the Internet.

3. Use cardboard boxes to make cars. First, prepare cardboard boxes, scissors, colored pencils, glue sticks and white paper. First, cut out the cardboard box with scissors that needs to be made into a car. Use scissors to cut off a small triangle on each side of the opening of the carton.

4. The method of making handmade cars with cartons is as follows: leave a narrow side of the carton, and then seal it with wide tape. Cut open about two-thirds of the sealing surface and turn out a piece of cardboard. Then fold the two pieces of cardboard in bal. Make the wheels and steering wheels of the car with disposable lunch boxes. Remember to color them first.

5. The specific operation steps are as follows: first, seal the carton with wide tape, and then cut two-thirds of the seal and turn out a piece of cardboard as the windshield of the car. Make 4 wheels with cardboard and fix them on both sides of the carton. After fixing the number wheel, just color the body of the car.

6. Hello, you can see the method of making carton cars in the link above. Production steps: Spread out the cardboard box, cut it out according to the shape scale shown in the figure, and spread it flat on the ground or table in order.Stick the parts well. This is the main body of the car.

Simple practice of handmade car

Steps to stick the colored paper to the paper roll, and then cut a small part of the paper roll with scissors and use it as a car cab. Step by sticking the four bottle caps to the four corners of the toilet paper tube, the beautiful toy car is ready.

First, cut the cardboard box into the body of the car, as shown in the figure. Then stick the colored paper on the carton and wrap the car, as shown in the figure. Take out another piece of colored paper and roll it into a cylindrical shape, as shown in the figure. Cut the cylindrical colored paper into wheels, and then put it on with a toothpick, as shown in the figure.

The practice of handmade cars is as follows: cut the cardboard to the appropriate size with scissors. And glue the window and body of the car with a glue stick.Cut out the roof with scissors and connect the roof and the window with a glue stick. Cut out the front cover, front window and rear window with scissors, and glue them to the car body with a glue stick.

The simple way to make a car by hand is as follows: material preparation: colored paper, paper tube (after the toilet paper is used up), 4 mineral water bottle caps, wooden sticks (remove the cotton swab head), double-sided adhesive, hot melt glue gun, scissors, etc.